歡迎光臨本網站!

Hotline:0566-5755680     0566-5755668

Home >> Products >>Copper valve >> Pipe Fittings6
Product Detail

Pipe Fittings6

Collect
  • DETAILS

The working principle of gate valve:

The opening and closing part of the gate valve is the gate. The movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and closed, and can not be adjusted and throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form wedges. The wedge angle varies with the valve parameters, usually 5 degrees, and the medium temperature is 2 degrees 52'. Wedge gate valve can be made into a whole, called rigid gate; it can also be made into a gate that can produce slight deformation to improve its workability and make up for the deviation of sealing surface angle in the process of processing. This kind of gate is called elastic gate. When the gate valve closes, the sealing surface can be sealed only by medium pressure, that is to say, the sealing surface of the gate can be pressed to the seat on the other side to ensure the sealing surface sealing, which is self-sealing. Most gate valves are forced to seal, that is, when the valve closes, the gate must be forced to the seat by external force to ensure the sealing surface. The gate plate of the gate valve moves in a straight line with the stem, which is called the lift bar gate valve, or the open bar gate valve. Usually there are trapezoidal threads on the lifting rod. Through the nut at the top of the valve and the guide groove on the valve body, the rotary motion is changed into linear motion, that is to say, the operating torque is changed into the operating thrust. When opening the valve, when the gate lifting height is equal to 1:1 times the valve diameter, the flow passage is completely open, but in operation, this position can not be monitored. In practical use, the vertex of the valve stem is used as the sign, that is, the position of the valve stem that is not moving is used as its full open position. In order to consider the locking phenomenon of temperature change, it is usual to turn back 1/2-1 circle at the top position as the position of the fully open valve. Therefore, the full open position of the valve is determined by the position of the gate, that is, the stroke. Some gate valves, stem nuts set on the gate plate, hand wheel rotation to drive the rotation of the stem, and make the gate lift, this valve is called rotary bar gate valve, or dark bar gate valve.

管件6


CONTACT US

Xinhe Industrial Zone,Qingyang,Chizhou,Anhui,China

Fax:+86-566-5755868

Tel:+86-566-5755680 / 5755668

PRODUCTS

Focus on Wechat Two-Dimensional Code

Technical Support: 億網網絡 | Admin Login
Call me!
×
微信麻将外挂 东营股指期货配资 现在什么股票趋势好 河南快3遗漏查询 业余赛车比赛 山东快乐扑克3遗漏360 st股票涨跌幅限制 股票分析师有前途么 辽宁11选5任5 双面盘是什么 官方北京赛车开奖记录